iSSi's Trail Pedals offer bold styling, reliable technology, and a wide platform for better contact while in and out of the pedal. The Trail platform disperses pressure on your foot and provides a little extra confidence when descending unclipped. Dual-sided entry makes these SPD-compatible pedals simple to get into, while easily adjustable entry/release tension is perfect for beginners and experts alike. With triple-sealed cartridge bearings and durable chromoly spindles, these pedals will spin smoothly for countless rides. Plus, four degrees of float helps your knees track naturally during every crank revolution.
When you need extra tread so your feet stay planted, Electra's Chopper Pedals are up to the task. With a durable pedal body and sturdy, smooth-spinning spindles, the Chopper Pedals give you the confidence you need in traffic or even on the trails. - Spindle: 9/16-inch
Foot, meet pedal. Thanks to the Stamp, you two will be closely acquainted. After scrutinizing data from the outsoles of top mountain bike shoe brands, Crank Brothers discovered that two distinct surface areas can optimize the shoe/pedal bond through the whole range of shoe sizes. The result is the Stamp, a pedal with minimum profile and maximum concavity. Specifications: - spindle material: forged scm 435 chromoly steel - body material: forged 6061-T6 - inner bearing type: igus LL-glide bearing - outer bearing type: igus LL-glide bearing - footprint: 100mm x 100mm (small) / 114mm x 111mm (large) - adjustable pins: 10 per side - minimal profile: 11mm-13mm thin - stamp small recommended for shoe sizes: 5-10 (us) // 37-43 (eu) - stamp large recommended for shoe sizes: 10-15 (us) // 43-49 (eu) - weight: 375g per pair (small) / 405g per pair (large)
Crank Brothers' Eggbeaters are 4-sided, which makes them super easy to enter and exit. Their open design makes them shed mud and debris quickly, and these pedals feature 6-degrees of knee-friendly float. The Eggbeater 1s feature chromoly axles, stainless-steel springs, and steel bodies.
These versatile pedals feature adjustable Shimano SPD bindings on one side and standard cages on the other: the perfect combination for riders who ride with cleated cycling shoes and also with regular shoes. With sealed bearings and chromoly axles, the M324s are durable and practical all-around pedals. - Weight: 533 grams (pair)
Size specific composite platform pedal with optimal shoe/pedal interface. - Optimal surface area - Minimal profile 13mm thin - 9 hex traction pins per side - Premium bearings & seal system - Stamp large recommended for shoe sizes: 10-15 (us) // 43-49 (eu) - Body Material: Composite - Footprint: 111mm x 114mm - Hex Traction Pins: 9 per side (mounted from back) - Inner Bearing Type: Igus LL-glide bearing - Outer Bearing Type: Enduro cartridge bearing - Shoe Size: 10-15 (us) // 43-49 (eu) - Spindle Material: Forged scm 435 chromoly steel - Warranty: 5 years - Weight: 329g per pair
Size specific composite platform pedal with optimal shoe/pedal interface. - Optimal surface area - Minimal profile 13mm thin - 9 hex traction pins per side - Premium bearings & seal system - Stamp small recommended for shoe sizes: 5-10 (us) // 37-43 (eu) - Body Material: Composite - Footprint: 111mm x 114mm - Hex Traction Pins: 9 per side (mounted from back) - Inner Bearing Type: Igus LL-glide bearing - Outer Bearing Type: Enduro cartridge bearing - Shoe Size: US 5-10 // EU 37-43 - Spindle Material: Forged scm 435 chromoly steel - Warranty: 5 years - Weight: 329g per pair
When it’s time to update the flagship XTR pedals, we look at every detail under a microscope. Off-road racing demands speed, focus, and control. And that’s exactly what the PD-M9120 delivers. Increased drivetrain efficiency, an intuitive and seamless interface, and predictable steering and traction control are the benchmarks of the M9100 series pedals. The M9120 are the weapon of choice for WC racers worldwide. BETTER MUD CLEARANCE - Cylindrical contact area sheds mud even better for consistent stepping-in & out performance and rider confidence. ADDED EFFICIENCY + DURABILITY - Increased axle strength for long service life. M9100 comes in two axle lengths – 52 mm and 55 mm crank to pedal center. LARGER CONTACT AREA - The M9120 platform is designed for maximum shoe-to-pedal contact area without extra weight or rotating mass. Cage protects the binding and makes step in easy. BETTER MUD CLEARANCE - Wider edge-to-edge contact area provides solid shoe-to-pedal interface, transmits power more efficiently for faster and more consistent acceleration, and better bike control.
At 110 x 105MM, Chromag's Scarab pedals feature one of the widest platforms available, yet thanks to the thin profile and chamfered corners, it has great clearance. Chromag's proprietary extrusion and machined design provides an ultra thin true-concave profile that is only 13mm at platform center. Custom traction pins are made of hardened steel and feature two height options via the removable washer. A shear line reduces pedal damage when the pins are struck. Each pedal features 42 placement options for the ultimate customization. • Low profile 13mm at platform center • True concave design • Custom adjustable height pin • 42 pin placement options • 430g / pair
The GEO TREKKING GRIP pedals are ideal for commuting. Featuring a one-sided SPD-compatible mechanism, with a flat surface elastomer grip on the other, safe for riding in any conditions. - Technology: Hybrid pedals = half flat + half clipless - Cleats: X-Track Easy - Cleats Standard: SPD compatible - Release angle: 13° - Retention: 5-10 - Body: Composite / Elastomer bi-injection - Traction: Elastomer bi-injection - Spindle: Chromoly+ - Platform width: 86mm - Weight (pedal): 228g - Weight (pair + cleats): 511g
- Cleats to fit Ritchey Echelon and Look Keo clipless pedals - Includes a pair of cleats and hardware
The KEO CLASSIC 3 PLUS maintains the fast clip in / clip out with easy tension adjustment, and features stainless steel construction for optimized pedal stiffness and transfer of power, and increased protection against wear. - Technology: Spring - Cleats: Keo Grip - Retention: 8 to 12 - Body: Composite - Spindle: Chromoly - Platform Material: Stainless Steel - Platform area: 400mm² - Platform width: 60mm - Q Factor: 53mm - Stack height + cleats: 17.8mm (11.5 + 6.3mm) - Weight (pedal): 140g - Weight (pair + cleats): 350g
Engineered to optimize the interface between the pedal and shoe for ultimate performance and power transfer. The kit includes: - 8 × 1mm traction pads - 8 × 2mm traction pads Compatible with: - Mallet E - Model years 2016 – present
A revolution in performance and reliability. The kit includes premium internal components: - Inner bearing o-ring x 2 - Spindle seal x 2 - Outer Igus solid bearing x 2 - Inner Igus solid bearing half x 4 - Bearing Retainer Bolt x 4 - Outer o-ring x 2 - Grease port screw x 2 - Compatibility: Stamp (2016), Stamp 7 (2017+), Stamp 11 (2017+)
$168.99 - $169.00
TMAC Signature Tyler McCaul Pedal. With over two years of development, it features one of the most concave designs on the market. Not only does the TMAC pedal give precise control, the non-offset design provides more contact with the pedal with equal weight distribution in front and back of the pedal spindle. This non-offset design feels like the largest pedal ever made at a mere 110mm x 105mm footprint. - Tyler McCaul signature pedals - 110mm x 105mm footprint - Super-concave 2.5mm deep pedal profile per side - 14mm thin at the center - Symmetrical pedal profile for added foot support and stability - Dual sided pins with pre-applied Loctite - Includes extra set of back-up pins - Load distribution system to prevent bearing blowout - Multi-micro-sealed bearings and Deity DU Bushing internals - Heat-treated chromoly spindle that is compatible with a standard 15mm wrench or 8mm allen - 9/16"
RaceFace Chester Pedal Spindle Kit Left/Right
The KEO 2 MAX pedal is an excellent example of LOOK's design experience. With its wide contact area and composite body, it offers state-of-the-art technology for full power transfer, in an affordable package. - Technology: Spring - Cleats: Keo Grip - Retention: 8 to 12 - Body: Composite - Spindle: Chromoly+ - Platform material: Stainless Steel - Platform area: 500mm² - Platform width: 50mm - Q Factor: 53mm - Stack height + cleats: 17.3mm (11 + 6.3mm) - Weight (pedal): 130g - Weight (pair + cleats): 328g
$120.00 - $135.00
Minimal & lightweight for xc/trail riding. 4-sided entry enables superior mud shedding, and customizable float and release angles create a dialed-in feel. Specs: Spindle material: Forged SCM 435 chromoly steel Body material: Cast stainless steel Wing material: 17-4PH stainless Spring material: 300 series stainless steel Release angle: 15° / 20° Q-factor: 52mm Inner bearing type: Igus LL-glide bearing Outer bearing type: Enduro cartridge bearing Cleat: Premium brass cleats with shims included Weight: 280g per pair Warranty: 5 years
Crank Brothers' Premium MTB Cleats are perfect for your Crank Brothers Eggbeater, Candy, Acid, Smarty, Mallet, and Quattro pedals. They're made from solid brass for crisp entry and exit, and top-notch durability.
Pre-cut traction tabs designed to integrate with the Highline remote lever and increase grip for ultimate control.
Polyurethane pads with diamond plate traction pattern allow riders to customize their pedals for a perfect interface with any shoe. - Kit includes eight 1mm traction pads and eight 2mm traction pads
$179.99 - $180.99
- Low-profile, lightweight, wide aluminum body with double-concave platform. - Platform size: 101x114cm - 4 Full sealed cartridge bearings per pedal - Super thin double concave wide platform - Hex-head threaded pin design offers more bite for added security - Fore and aft angled bottom-loading pins - Hidden pin / Grease access port - 20 SHCS hex traction pins per pedal
iSSi's Trail Pedals offer bold styling, reliable technology, and a wide platform for better contact while in and out of the pedal. The Trail platform disperses pressure on your foot and provides a little extra confidence when descending unclipped. Dual-sided entry makes these SPD-compatible pedals simple to get into, while easily adjustable entry/release tension is perfect for beginners and experts alike. Plus, four degrees of float helps your knees track naturally during every crank revolution.
The DELTA standard requires a rotational movement of the foot toward the outside or inside for disengagement. This function improves cyclist's safety; no body or bearing prevents disengagement toward the inside. Compatible with non-KEO LOOK pedals, their contact area is wide for optimal comfort. They also feature a memory positioner to aid when changing cleats. - Use: Road & Indoor Bike - Material: Polyacetal + PTFE - Lateral adjustment: 4mm - Longitudinal adjustment: 12mm - Weight (pair + fasteners): 75g
Whether you have smaller feet or prefer a smaller platform, the VAULT MIDI offers everything you would expect from a DMR pedal in a more compact package. - With the same pin pattern and profile of its larger brother, the Vault MIDI offers a platform size 10% smaller than the Vault - 95mm x 104mm - 17mm concave foot bed - High load DU bushing and cartridge bearing - 9/16"
LOOK Trail Grip pedals with Activ Grip by Vibram rewrite performance and personality rules for off-road riding. Unique, mountain peak-evolved, composite stud and rubber lug tread inserts give brilliant bike control and slip free security without trashing your shoes or your shins. Race-bred bearings and four switchable colors deliver smooth style. - Technology: Flat pedals + LOOK Activ Grip by Vibram - Body: Composite - Traction: Vulcanized Rubber Activ Grip + Composite studs - Spindle: Chromoly+ - Surface area: 107x103mm - Weight (pedal): 265g - Weight (pair): 530g
- Genuine leather-wrapped chrome plated steel - Hardware included
All new external varus wedge fits between the cleat and the sole of your shoe for the perfect hip, knee and foot alignment. - External varus/valgus cleat wedge - Provides one-degree of varus/valgus correction - Shaped to fit SPD-SL, Look Keo and Speedplay - Package includes eight wedges
Wahoo's new Speedplay Walkable Cleat technology for Ultra Light Action pedals sets a new standard for user-friendly, off-the-bike functionality. The Ultra Light Action Walkable Cleats are the first truly walkable cleats for road pedals. The integrated, rubberized covers stay on the cleats while you are riding. When walking, the covers improve traction and protect the cleats from wear. Additionally, the thin, contoured cleat profile allows for a more natural gait and makes walking in road shoes much less awkward. Included with the cleat sets are handy plugs called Cleat Buddies for use when walking in dirty conditions. Cleat Buddies prevent debris contamination by fitting into the cleat's center cavity. When you are ready to ride, Cleat Buddies can be easily removed for riding and conveniently snap together to fit in a pocket or bag. - Grippy, rubberized tread covers the cleat for improved traction - Durable cover material is resistant to wear and will not scuff floors - Thin, contoured cleat profile makes walking easier and more fluid - Fits all standard 3-Hole and 4-Hole shoes
45NRTH's Replacement Pedal Pins are a great way to customize the style and grip of your 45NRTH pedals (sold separately). These tough, aluminum pins deliver fantastic bite into traditional winter boots, and come in a variety of colors to coordinate with your rig. Plus, the included wrench keeps the job quick. - Includes: 32 pins and wrench
Page 1 of 5 Next page