Filter By:

  • Show More Brands

  • Show Fewer Brands
  • Show More Sizes
  • Show Fewer Sizes

Chainrings

Surly Stainless-Steel Chainring (130mm BCD)
$50.00 - $70.00
Surly's Stainless Steel Chainrings last longer than their aluminum brethern because the 304 grade metal they use is 35% stronger. The rings aren't pinned or ramped so when one side starts to wear you can flip it around and pedal some more! They work great with singlespeed, fixed, and 1x9 applications, and the teeth are 2.1mm thick so they work well with 9-speed chains.
Shimano 105 5750 Double Chainring
$26.00 - $51.00
Shimano 105 5750 10-Speed chainrings are a quality, reliable replacement option for worn out chainrings on compact double cranksets.
Race Face Light Bash Guard
$34.99 - $36.99
Race Face Light Bash Guard Chainring Guards - Machined from AL-7075 - Compatible with all current and older Race Face cranks - Designed to protect your middle and inner chainring from impacts - Manufactured from bombproof, heat treated aluminum - CNC profiling gives a 25% weight savings over 'cookie cutter' bash rings - 4 bolt (104 BCD) configurations to cover rings from 32T through 40T
Wolf Tooth Components Cyclocross Chainring
$79.00 - $89.95
- Cyclocross ring with Drop-Stop tooth design to prevent unwanted chain drop - Recommended for use with 10 or 11sp chain (10sp chain works on 9sp drivetrain) - Designed and manufactured in the USA from 7075-T6 aluminum alloy
Wolf Tooth Components Direct Mount Chainrings for SRAM Cranks
$69.95 - $74.95
Wolf Tooth's SDM chainrings replace your existing spider and chainring with one clean looking, light weight, and stiff piece of machined billet. These come in 3 different offsets: standard GXP, Boost and BB30. Compatibility: - These direct mount chainrings will replace your existing chainring and spider, which is attached via 3 bolts on the back side of the spider near the spindle. You will use these same 3 bolts to attach the Wolf Tooth SDM® chainring. There are 3 offsets: - Standard: 47mm chainline, 6mm offset for cyclocross and road cranks - Standard: 49mm chainline, 6mm offset for GXP and long spindle BB30 - Boost: 52mm chainline, 3mm offset - BB30: 49mm chainline, 0mm offset for BB30 short spindle cranks - Fat Bikes: If you are planning to use this on an X9 or XX1 fat bike crankset with a 190/197 rear hub spacing use the 0 offset ring. If your fat bike has a 170/177 rear hub spacing, use the Standard 6mm offset - If you have a BB30 crankset (30mm diameter Aluminum Spindle) this measurement will determine whether it is a long or short spindle:
Wolf Tooth Components 110 BCD Cyclocross and Road Chainrings
$89.95
Wolf Tooth was first to the market with Cyclocross 1x specific chainrings because they saw Cyclocross as the perfect use for our Drop-Stop technology. Since their release, the uses for these rings has expanded beyond Cyclocross to commuting, gravel riding, mountain bikes with 5-arm crank power meters, and even full on road applications with the giant 50t rings! Compatibility: - These rings are for use with 110 BCD 5 arm cranksets. Do NOT fit Shimano DA 9000 / Ultegra 6800 - Not compatible with Campy CX10/11. - Can be mounted in either the big or small ring position of a double crankset given chainstay clearance in the small ring position. - Stock 2x bolts will not work. You will need 6mm bolts which are optimized for single ring mounting. - For 1x9, 1x10, 1x11 and 1x12 drivetrains (including SRAM Eagle) - Compatible with all 10, 11, and 12 speed chains (Including SRAM Eagle) - If using a 9 speed drivetrain use a 10 speed chain (shifts and works well on a 9 speed drivetrain and fits the ring tighter for better chain retention).
Wolf Tooth Components Shimano M9000/M9020 Chainring
$64.95 - $69.95
- Fits asymmetrical 96mm BCD with built-in threaded standoffs - Used on Shimano XTR M9000 and M9020 crankset (both race and trail models) - Features Drop-Stop tooth design to prevent unwanted chain drop - Mount using the stock Shimano XTR M7 chainring bolts - 49mm chainline for 28-34 tooth and 50mm for 36 tooth - Recommended for use with 10 or 11sp chain (10sp chain works on 9sp drivetrain) - Made in the USA from 7075-T6 aluminum alloy - 41g (30t)
Wolf Tooth Components 5-Spoke GXP Direct Mount Ring
$69.95 - $74.95
Wolf Tooth's SDM® chainrings replace your existing spider and chainring with one clean looking, light weight, and stiff piece of machined billet. These come in 3 different offsets: standard GXP, Boost and BB30. Compatibility: - These direct mount chainrings will replace your existing chainring and spider, which is attached via 3 bolts on the back side of the spider near the spindle. You will use these same 3 bolts to attach the Wolf Tooth SDM® chainring. - There are 3 offsets: Standard: 47mm chainline, 6mm offset for cyclocross and road cranks Standard: 49mm chainline, 6mm offset for GXP and long spindle BB30 Boost: 52mm chainline, 3mm offset BB30: 49mm chainline, 0mm offset for BB30 short spindle cranks - Fat Bikes: If you are planning to use this on an X9 or XX1 fat bike crankset with a 190/197 rear hub spacing use the 0 offset ring. If your fat bike has a 170/177 rear hub spacing, use the Standard 6mm offset
Wolf Tooth Components Direct Mount Chainrings for Race Face Cinch
$69.95 - $74.95
These chainrings are for Race Face Cinch cranks such as Turbine, Next SL, Sixc & Aeffect. The Wolf Tooth Cinch rings feature a our patented Drop-Stop design for the best wear life, chain retention and mud clearance. We have both Boost and standard chainrings. - CNC machined aluminum ring fits Race Face cranks with Cinch System - Features Drop-Stop tooth design to prevent unwanted chain drop - Asymmetrical tooth shape for the best wear life, chain retention and mud clearance - Recommended for use with 10 or 11sp chain (10sp chain works on 9sp drivetrain) - Made in the USA from 7075-T6 aluminum alloy
Wolf Tooth Components Set of 4 Chainring Bolts for M8 Threaded Chainrings (10mm Long)
$14.95
Wolf Tooth designed these bolts to be the best on the market. They have a 4mm hex socket and are 10mm long so you can use a bash ring with your chainring that has threaded standoffs like the Wolf Tooth 104 BCD 30t ring, Elliptical 104 BCD rings, 76 BCD rings and others. No nuts are included with these bolts as they are intended for use with threaded chainrings. These work great with Wolf Tooth or any other brand threaded M8 x 0.75 chainrings.
SRAM Force X-Glide 11-Speed Chainring -130 BCD
$147.00
Replace worn out chainrings or change out gearing with SRAM's Force X-Glide Chainring. This solid ring is crafted from aluminum using SRAM's X-Glide tooth profiles for quick, responsive shifting.
Dimension Multi Speed Chainrings
$18.99 - $49.99
Dimension Multi Speed Chainrings. - CNC-machined AL-7075 - Has ramps and pins to aid in shifting (not on 74mm BCD inner chainring) - Same BCD as Surly Long Haul Trucker, Cross-Check, and Troll complete bikes (74mm & 110mm)
SRAM X-Sync EX1 Chainring
$21.00
The EX1 drive train was designed specifically for the demands of electric-assist mountain bikes: a wide gear range with bigger jumps between gears and sturdy components to handle higher torque loads. Liberal use of features found on SRAM’s high end MTB parts provide high value, quiet operation and ease of service. - X-Sync (wide-narrow) tooth profiles for great chain management - Compatible with Bosch mid-drive E-bike systems - Material: Steel - Size/BCD: Direct mount - Recommended Group: EX1
Wolf Tooth Components 64/104 Chainring
$59.95 - $65.95
- Standard 4-bolt ring with Drop-Stop tooth design to prevent unwanted chain drop - Recommended for use with 10 or 11sp chain (10sp chain works on 9sp drivetrain) - Designed and manufactured in the USA from 7075-T6 aluminum alloy - 36g (30t)
SRAM X-Sync Asymmetric BCD Chainring
$42.00 - $49.00
Tall teeth with alternating tooth profiles hold the chain amazingly well and still provide space for mud to clear. - Full CNC Aluminum rings - Ring Position/Type: Chain Retaining Single Ring - Drivetrain Speeds: 10, 11 - Chainring BCD: 110 SRAM Asymmetric
SRAM Force X-Glide 11-Speed Chainring -110 BCD
$141.00 - $147.00
Replace worn out chainrings or change out gearing with SRAM's Force X-Glide Chainring. This solid ring is crafted from aluminum using SRAM's X-Glide tooth profiles for quick, responsive shifting. If you have a SRAM Force 22 compact crank (50/34), this is the ring for you.
SRAM RED X-Glide 10-Speed Chainring (130 BCD)
$36.99 - $135.00
Replace worn out chainrings or change out gearing with SRAM's RED X-Glide Chainrings. These solid rings are crafted from aluminum using SRAM's X-Glide tooth profiles for quick, responsive shifting. If you have a SRAM RED 10-speed Exogram* standard crank, these are the rings for you. RED Exogram cranks have a hidden 5th bolt behind the crank arm
SRAM X-Sync 2 Eagle Direct Mount Chainring
$99.00
The radical look and feel of SRAM's X-SYNC 2 Eagle chainring is a direct result of SRAM drivetrain engineers studying the performance and wear characteristics of thousands of X-SYNC chainrings. They subjected every size of chainring to untold environmental and mechanical tortures, abuse and neglect, in both lab and real-world settings, to come up with a chainring that would augment the Eagle drivetrain’s performance in all conditions. The longer, positive-rake tooth shape has been designed to work perfectly with the Eagle chain to increase chain retention and overall pedaling efficiency, while decreasing friction, noise and wear.
Odyssey Tom Dugan Fang Sprocket
$51.99
This is Tom Dugan’s all new signature sprocket. In addition to its classic look, the Fang increases in thickness towards the center of the sprocket for increased strength. - 7075 Aluminum - Sweet machining
All-City Cross Chainring
$40.00 - $48.00
These CNC’d lovelies will work just fine in a multi-ring setup, but they’re not equipped with shift ramps or pins, which makes them perfect for single-ring drivetrains. - Longevity, performance, and quiet operation - Material: CNC-machined 7075-T6 Aluminum - Chain Compatibility: 8-, 9-, or 10-speed compatible
e*thirteen by The Hive Guidering M (Narrow/Wide) Chainring
$43.95
- Guidering M to fit any 4x104mm BCD crank - Dual width "M" (narrow/wide) tooth profile engages the chain securely even at extreme angles - 7075-T6 aluminum construction optimized for all chainguide systems to prevent chain jamming -1mm swappable chainline
All-City Pursuit Special
$79.99
The Pursuit Special is All-City's addition to the pantheon of high end track chainrings. They were designed in house by track racers for track racers and are optimized for weight, stiffness, and engagement. These beauties are cnc’d in the USA and utilize a proprietary tooth profile for smooth and quiet operation. The 49-52’s utilize a solid body design with reliefs in the back for weight savings, while the 46-48’s have full cutouts. In sticking with the theme of their aluminum track bike, the Thunderdome, All-City named these rings after Mad Max’s car, the Pursuit Special. - Material: 7000 Series Aluminum - Ring Position/Type: Single
Shimano Deore XT M8000 11-Speed Inner Chainring
$25.00 - $29.00
Shimano XT M8000 11-Speed Chainrings - Chainring BCD: 64 Shimano Asymmetric - Color: Silver - Drivetrain Speeds: 11 - Material: Aluminum - Ring Position/Type: Inner
Shimano Deore XT M8000 11-Speed Outer Chainring
$65.00 - $111.00
Shimano XT M8000 11-Speed Chainrings - Chainring BCD: 96 Shimano Asymmetric - Color: Black - Drivetrain Speeds: 11 - Material: Aluminum - Ring Position/Type: Inner - Tooth Count: 34
Shimano 105 5800 Chainring
$18.00 - $106.00
- Drivetrain Speeds: 11 - Chainring BCD: 110 Shimano Asymmetric - Material: Aluminum
Shimano SLX M7000-2 Inner Chainring
$28.00
- Ring Position/Type: Inner - Drivetrain Speeds: 11 - Chainring BCD: 64 Shimano Asymmetric - Material: Aluminum
TruVativ XX Inner Chainring
$113.08
TruVativ XX Short Pin Chainrings for BB30 Cranks, use with 26T - Ring Position/Type: Inner - Drivetrain Speeds: 10 - Chainring BCD: 120 - Material: Aluminum
SRAM Triple Alloy Outer Chainring
$47.43 - $57.54
Original equipment on SRAM and Truvativ cranks, they also work well with other drivetrains. - 7000 series aluminum provides strength and durability
Shimano XTR M9000 Chainring
$132.99
Shimano XTR CRM91 1x11 Chainrings - Hollowglide technology provides exceptional driving stiffness and strength - Titanium, carbon, and aluminum materials - Titanium teeth for lightweight durability - Modified tooth profile prevents chain drop - Ring Position/Type: Chain-retaining single ring - Drivetrain Speeds: 11 - Chainring BCD: 96 Shimano Asymmetric
SRAM CX1 X-Sync Chain Ring
$82.99 - $99.99
Mud and moving parts are enemies in the sport of cyclocross. That's why SRAM decided they were going to simplify things. Remove the front derailleur, increase the range of the cassette, make dropped chains a thing of the past, and you've got a cross drivetrain worthy of hammering. SRAM's CX1 X-Sync Chain Ring is an integral part of that system. It mates to 110 BCD cranks and features a wide-narrow-wide tooth profile to securely hold the chain through the roughest terrain. It's also specially designed with mud clearing in mind to keep your rig light and fast. A variety of sizes ranging from the spin-to-win 38T to the flat-out 46T let you dial in your rig for your strengths or course.