The ForkLift is one of Yakima's most versatile fork-mounted roof racks. It boasts square, round and direct-to-factory crossbar capability right out of the box. It also features quick and easy tool-free installation, a sleek design and a smooth, automotive finish that looks great on any car. The easy-to-adjust sliding wheel tray makes positioning the rear wheel a snap and it’s compatible with most disc brakes.
With an iron grip, Thule's Rapid Crossroad turns factory-installed raised rails into a versatile multipurpose rack system. Your car's rails are fully protected thanks to the integrated rubber lining. You also get maximum rack strength and a custom fit from the tooless, rubber-coated steel straps.
RockyMount's Brass Knuckles rack gets your bike from point A to point B with the minimum of hassle and the maximum of security. The aluminum arm uses finely indexed ratcheting to hold front bike wheels from 20- to 29-inches with widths from skinny road tires to fat DH monsters. Form-fitting mounting hardware plays nicely with almost any roof-mounted bars: round, square, or aero. When your bike isn't on the roof, the arm folds down for an extremely low profile for minimal wind noise and maximum gas mileage. For extra security, you can lock the bike to the rack and the rack to your car with lock cores (sold separately).
The RockyMounts Tomahawk low-profile upright mount that's easy to use and even easier on your wallet. Fat-bike ready out of the box (up to 5" tires), and will hold all styles of bikes, road, mountain, cruiser, and childrens (20 - 29" wheels). Features: - No bike frame contact - simply ratchet the hook over the front wheel and secure the front/rear wheelstraps - Fat bike ready (up to 5" tires) out of the box. Includes two wheel strap extensions - Swingarm easily adjusts for driver side and passenger side installation - Mounts to all styles of crossbars - round, square, factory, aero - Holds all styles of bikes, 20 - 29" wheels (except those with front fenders) - New Easy-Load wheel straps make loading bikes easier than ever - Optional 2-pack locks (sold separately) lock rack to car and bike to rack
Carry your boards safely and easily with Thule's Universal Snowboard Carrier. This two-board carrier uses locking arms to grip your snowboards securely without scratching the base or deck, and the angled jaws raise the bindings so your cars finish won't get scratched. These carriers adjust to fit snowboards of all sizes, and they can be installed on all Thule rack systems, round load bars, and most integrated factory racks. They even come with two One-Key lock cylinders so your gear will stay safe when you park your car.
Thule's Load Bars are a rock solid rack solution that come in 4 different widths to fit a huge range of vehicles.
Thule's Sidearm is perfect for bikes with non-traditional frame designs or unique fork/hub interfaces because it holds bikes by the wheels only. For fast and easy loading, Thule's ratcheting SecureHook clamps the front wheel, while a ratcheting strap secures the rear. The Sidearm accepts most bicycles including those with 29-inch wheels. This fine bike mount fits on square and round crossbars (sold separately).
Prioritizing the buffet of gear laid out on your living room floor can be a painstaking process. Should you take this? Will you need that? We have an easier solution: Throw the new Mini-Skinny on the roof and take all of it. With as much space as a comparable “fat” basket and 50-percent more usable crossbar space, you’ll be packing your gear, your friend’s gear and your friend’s dog’s gear. Half the width—Twice the fun. Offers fit options for the best of both worlds. Your worlds, whatever worlds they may be. Be it cycling, kayaking, or road tripping to the ski lodge. The Skinny’s distinct design provides the same load surface as other “fat” cargo racks while leaving 50% of usable crossbar space for, you know, whatever you need. -1 Bike Capacity (50lb bike, 9mm skewer) -Roof bar mounts come equipped with lock cores -Comes fully assembled -Matte Black Powder Finish -Fairing included with silver accents -Mounts to most factory & all aftermarket cross bars -1 Integrated bike mount with skewer -160 lb. capacity with bike & gear (always adhere to cross bars posted weight limits) -Max crossbar size-4.5” wide by 1.75” thick -2 piece design with option for Mini Skinny Extender to allow for more room -Two-Piece: 68” L x 23” W x 7” H
Thule's Echelon Fork Mount makes racking your bike ultra easy. Thule's Equalized Twin Cam makes adjusting the fork clamp quicker and simpler than ever. And, it carries most bicycles, including those with disc brakes and models with tires up to 2.6 inches wide. Plus, the fork mount's dual-lock head locks your rig to the mount and locks the mount to the rack, too. The Echelon fits on square and round crossbars (sold separately).
The RockyMounts SwitchHitter is the most versatile fork-mounted bike carrier ever created. It fits ALL styles of crossbars out of the box (T-Track hardware included for slotted bars), 9mm QR bikes, and thru-axle bikes (12x100, 15x100, "Boost" 15x110). It also features integrated, magnetized cable lock pulls out of the rear of the tray (lock cores not included–a 2-pack is recommended). Features - Fits Yakima round, Thule square, factory/aero, and slotted bars (with T-Track hardware) like RockyMounts Ouray, Thule AeroBlade, Yakima Whispbar, Yakima StreamLine, and Rhino Rack crossbars - Includes 12x100 axle, 15x100 axle, "Boost" 15x110 axle, and 9mm QR.
Thule's Domestique Fork Mount bike carrier boasts an oversize aluminum tray that's aerodynamic to cut down on wind noise and increase gas mileage. And it accepts any bicycle, including disc-brake equipped models, and those with tires up to 2.6 inches wide. The Domestique also fits on square, round and aero crossbars (crossbars sold separately), and even on most factory-installed racks. Plus, for top security, the fork mount head features a dual lock that locks your rig to the mount and locks the mount to the rack.
Thule's Foot Packs are the "feet" that attach to your vehicle's roof and allow you to then add Thule crossbars (also called "loadbars"), and the Thule bicycle mounts and accessories required to carry all your gear (crossbars, mounts and accessories sold separately). All mount without tools, are vinyl-coated so they can't damage your 4-wheeler, and are engineered to hold fast under all conditions. They have wide bases for excellent support no matter how many bicycles you carry, and most are sealed from the elements to protect the internal mechanism.
Thule's Traverse Short Roof Adapter enables installation of a rack system on 2-door cars or cars with short roofs. It increases the stability of your rack and gear which means you can safely carry more equipment. It's designed for use with the Traverse Foot System and Rapid Aero or square crossbars.
Upright bike carrier for the quickest, most convenient mounting-for bikes up to 44 lbs. - Automatically positions your bike when you secure it, thanks to the uniquely designed frame holder and wheel tray. - Quick and easy bike securing – the torque limiter dial controls the force going into the bike frame with a clear sign of correct mounting. - Pressure is spread via large, soft claw pads that adapt to your bike’s frame tubes – minimizing the risk of frame damage. - Safe mounting – your bike is prevented from falling thanks to the claw’s extended lower jaw. - Stable wheels – firmly fixed in smartly designed wheel holders with diagonal quick-release wheel straps. - Easy, tool-free interface for switching carrier from one side of your car to the other. - Mounts on Thule AeroBlade Edge, Thule AeroBlade, Thule SquareBar and round bars.
Yakima's CrossBars are a necessary component of your rack system. They attach to your towers and enable you to affix bike trays, ski carriers, rooftop boxes, etc. Strong and durable, they're made of vinyl coated steel and stand up to harsh weather.
$48.00 - $120.00
Yakima's vehicle-specific Landing Pads are required to mount Yakima Control Towers to your car. One end of the Landing Pad attaches to the Tower and the other end attaches to your vehicle's factory track system. They also have rubber bottoms to protect your vehicle's finish. Select the right model Landing Pad for your vehicle using the Yakima fit configurator.
With an iron grip, Thule's Rapid Crossroad turns factory-installed raised rails into a versatile multipurpose rack system. The streamlined, seamless look is achieved with the aero Rapid aluminum load bar. But these aren't just sleek looking, the aero design cuts down on wind resistance and noise. Your car's rails are fully protected thanks to the integrated rubber lining. And you get maximum rack strength and a custom fit from the rubber-coated steel straps.
Thule's AeroBlade Load Bars are the strong, silent type. Using a sophisticated BoxBeam construction, they're some of the strongest load bars on the market with a capacity of up to 165 pounds. That's the strong, now for the silent: In addition to their wing-like shape, the AeroBlades sport a textured surface that greatly improves wind flow so you get drastically reduced noise and much better gas mileage. The bars are easy to use, too, thanks to Thule's SmartSlide sytem that makes installation hassle free and their SwingBlade technology that allows full access to the T-slot for easy accessory additions.
Toting a tandem can be tough. Not any more. Yakima's Sidewinder makes it easier than ever to transport your twofer. The clever swingarm fork mount makes loading a one-person task and the padded boom cradle won't harm bottom-routed cables. Universal snap-around mounts allow the Sidewinder to attach equally well to round (Yakima) and square crossbars. It's designed to clear hatches and flip-up rear doors on most vehicles, too.
The FrontLoader is one of Yakima's most versatile upright mount roof racks. It boasts square, round and direct-to-factory crossbar capability right out of the box. It easily handles wheel sizes from 20 inches, to 700c road wheels, to large 29er mountain bike tires. Even if your bike has a unique frame design, there will be no problems carrying it because the FrontLoader holds the wheels and not the frame. Plus, it won't scratch your paint!
The LoadWarrior is the perfect accessory to boost the carrying capacity of your Yakima roof rack, plus it fits many other racks, too. Ingeniously, bike mounts attach directly to the basket to make carrying bikes easy, too. This cargo carrier is big enough to handle all your gear. The LoadWarrior even comes with a custom fairing that cuts wind drag and noise.
Got a Texas-sized SUV equipped with Yakima's MegaWarrior rooftop carrier? Then you may need Yakima's MegaWarrior Extension. It's constructed of heavy-duty, weather-resistant steel and it adds 22 inches and 40% more carrying capacity to Yakima's MegaWarrior rooftop basket (sold separately).
Yakima's Universal Mighty Mounts are a simple way to install Yakima accessories on your car's factory racks. The universal design fits almost all factory crossbars.
Yakima's Q Stretch Kit enables installation of a rack system on 2-door cars or cars with short roofs. It increases the stability of your rack and gear which means you can safely carry more equipment. It works with Q Towers.
$43.00 - $50.00
Yakima's vehicle-specific Q Clips are required to mount Yakima Q-Towers to your car. One end of the Q Clip attaches to the Tower and the other end attaches to your vehicle's door frame when you fasten your roof rack. Plus, they're coated to protect your vehicle's finish. Select the right model Q Clip for your vehicle using Yakima's rack configurator.
- Fits all Yakima crossbars except 86-inch - Sold in sets of 4
Let your friends enjoy the trip, because loading and unloading with the BoatLoader could not be easier. The telescoping load-assist arm lets you load your boat while protecting your vehicle and your boat, and retracts into your Yakima crossbar when not in use. - Telescoping boat load-assist arm retracts into your Yakima crossbar - Protects kayaks, canoes and your car from dings, scratches and dents - Corrosion-resistant - Fits Yakima round crossbars only - Extends 28 inchesfrom end of bar
Loading your boat has never been easier than this! Two front and two rear saddles with integrated rollers will have you and your friends on the water in no time. The spring-loaded base automatically adjusts to boat when loading. - Mounts to any bar type without tools, making installation a cinch. easy loading Fully assembled out of the box - Tool-free installation Fits Yakima round, square, factory and aerodynamic bars Spring-loaded base automatically adjusts to boat when loading - Smooth molded pad hugs and protects multiple boat types - Tilting paddle technology to accommodate an array of boats and roof rack systems - Includes Heavy-Duty Straps and Bow/Stern Tie-Downs - SKS Locks sold separately - Supports one boat up to 80 lbs Minimum crossbar spreads of 24or more
Getting your gear onto your rack isnt complete until youve secured it. This pair of super strong box-stitched 16 straps include soft, rubber-coated buckles to protect your boats and gear from scratches.
- Securely carries both road and mountain bikes QR and thru-axles - Includes interchangeable inserts for QR axles (9mm) and thru axles (12mm, 15x100, 15x110) - Fat Bike compatible with optional accessory (Sold separately) - No frame contact means no damage to carbon fiber and custom paint jobs - Optional SKS locking package secures mount to vehicle, bike to mount (sold separately) - 1 bike, 40lbs capacity
Page 1 of 3 Next page